Can you sew without a bobbin case

You can wind the thread on it by hand easily but many sewing machines have a built-in bobbin winder. The bobbin is covered in a case called a bobbin case which holds the thread while providing tension to the lower thread. As the needle thread is pulled around the case of the bobbin, it gets wrapped around the thread of the bobbin and gets pulled through the plate.

A bobbin case is also important to maintain the tension of the thread which ensures the balanced and smooth stitching of the fabric.

Without a bobbin, it is difficult to thread practical stitches so that makes a case of bobbin an essential part of every sewing machine. Now that you know what is a bobbin used for, you must have understood how important it is to keep the stitch intact. Hand sewing is of the oldest and traditional method of stitching. Even with a sewing machine, a little touch of hand sewing makes the finished product a whole lot better! While it requires a lot of time and patience, hand sewing is an art that you should master.

While sewing with a machine gives more precise and smooth results, fabric glue is a great alternative depending upon what you are using it for. These glues are quite strong and hold the fabric together permanently. T he best part about a fabric glue is that it is nontoxic, washable, and dries quickly. Furthermore, fabric glue is a quick solution to fix torn hems, trims, and to fix the broken zippers. It can also be used to add embellishments to your clothes. I hope this makes sense and helps you out a bit!

Hi Sarah, I have a Morse and lost my bobbin case, are there any that are interchangeable with this machine. Hi Sarah.. I have a brother sewing machine. My thread keeps tangling down the fabric and the feed dogs catches my fabric.

When I remove the part down to see how the machine is threading, I realized an area underneath the bobbin case has been slit by the thread so the thread holds up there. This is a new sewing machine just five month old. When i called my local repair shop to see what my problem is, he just smoothing that area under the bobbin case.

It worked for sometime and few days later started again. Do you think is the broken bobbin case and it needs to be replaced? Hi Evelyn, did this issue start after you changed thread? The technician you spoke with recommended the same thing I would typically recommend. I would check out my post Sewing Blunders and How to Fix Them to make sure that you have appropriate tension on your machine! Try that first, and if all else fails, try calling Brother directly.

Hi Jackie, it appears to me that your machine takes a 15 class metal bobbin case — thanks for your question! Hi Sarah, I am so happy that I found this post, thank you so much for creating it. I Sew for a living and I use a singer quantum.

I have problems with my thread bunching in the back of the fabric. When I take my machine in the repair guy says a have burrs that need to be filed down, what am I doing wrong? My repair guy suggests that I find a machine that has a metal bobbin case. Can you recommend a good sewing machine that has one? Thank you, Sherry. Just in case, I would check our troubleshooting post and make sure that your top thread is properly in the tension, as this can sometimes worsen the problem and make it more likely to mar your bobbin case.

As far as a replacement, I always recommend old at least 30 years Singers and Kenmores to anyone looking to sew either heavy fabric, a lot of layers, or very often. They tend to hold up longer and are more well-equipped to handle heavy fabric and use.

Everyone has very specific sewing needs, and spending the time to do research and test out potential options is extremely valuable. Is there a place to buy that replacement part? The screw on the hinge appears stripped too? The screws and springs are very specialized and therefore fairly expensive on their own. Hope that helps! I have a Singer Merrit and had to remove the bobbin case to adjust the metal plate under it because my needles kept hitting it.

Any input would help tremendously! It sounds likely that the escapement is adjusted too narrow to allow the bobbin case to be replaced. Unfortunately, that is not something I am able to help with over the internet — I recommend bringing your machine to a trusted repair shop to get it working the way it should.

Thanks for the good explanation. It has been great until this week. Bobbin thread is seen on top, missed stitches and squirrel nests on bottom of fabric. I have rethreaded, rewound bobbins, adjusted pressure foot and needle tension. I cleaned out the bobbin case of lint, and nothing helps. The bobbin seems to be rattling a bit and my bobbin cutter does not cut. Any idea what to try next? Hi Sarah, my grandmother has lost a bobbin case for her what we think is a s Singer machine.

Could you direct me to what to buy for her? Hi Sarah! Check the machine for a model number — normally on the front plate of the machine. You will be able to determine which style bobbin case you need based on that — unfortunately there are quite a few different kinds of Singer bobbin cases from that era, so you really do need a model number. I know this is a lot of information, but hopefully it helps! Since the machine is so new, I would try taking it back to a certified Juki dealer. Those three issues together could be a sign of a bad adjustment or something being broken.

Hi Sarah, thanks for all this wonderful information. I have an Imperial I believe the company was purchased by Janome at some point. The bobbin case is a J-H2. I guess the good news is I have the bobbin case but no bobbins or manual for that matter. Any ideas as to which bobbin s would work for this case? Wouldn't it be wonderful if sewing machines didn't have a ton of tiny pieces? They're dangerous puzzles with pointy bits and moving gears that can pinch the skin.

Thankfully many of those tiny pieces sit tucked away and out of sight, like your bobbin. The bobbin carries out a key function that you need to create anything from a hand warmer to a wedding dress. A bobbin secures the threading and locks the stitch by using two thread-sources. Trying to use a sewing machine without a bobbin is like trying to eat with chopsticks with only one chopstick. You can poke around, but you might just have to use your hand. Every lockstitch sewing machine uses a bobbin.

Nearly every machine you'll come across easily will rely on a bobbin to create tight and effective stitches. Even a basic zig-zag stitch requires a bobbin. All bobbins are tiny, but it's not well-known that there are many different sizes.

Experienced sewers are even surprised to learn that bobbins come in various materials such as wood in addition to metal and plastic. There are times that a machine may not have a bobbin, but those are exclusively chain stitch sewing machines. These machines sew differently because they use a single top thread that loops over itself and creates a chain. Chainstitch machines aren't common, so effectively, you can't use your sewing machine without a bobbin.

But, what would happen if you tried? If you have lost or broken your bobbin, then your machine won't actually do much more than pierce the fabric. This issue happens because your top thread isn't looping through anything when it passed through the fabric. The needle will pierce the fabric, and the thread will pull right out as the needle moves. The only silver lining of this is that running the machine without the bobbin doesn't actually put your machine at risk.

It's not like trying to make the machine run through a cluster of thick fabric with a needle made for standard weight work.

A handful of questions come up with bobbins and when you should use them or when you might not need them. We already covered that unless you have a chain stitch machine, you will always need a bobbin, but it is worth exploring why these questions come up and giving direct answers. This question actually dives into some of the deep mysteries of the super fancy machines we're using nowadays.

Sewing machines now have so many stitches that even expert sewers need to bust out the manual to read over before selecting the right decorative stitch or embroidery setting.

With embroidery, you absolutely need a bobbin, just like with any other regular stitch, the bobbin uses a lower thread to secure the stitches into place.

Embroidery with a bobbin does offer some unique elements, such as less bulk on the back of the fabric than you might have with hand-stitched embroidery.

There are "general" bobbins, but using the wrong bobbin cause really takes a toll on your machine. We mentioned earlier that bobbins could come in different shapes and materials. It is always best to match your bobbin and sewing machine. Reference your manual to be certain that you're using the right size and the right kind of material.